Operating Tips:

Bottom Roller Arc Adjust 3 Rollers Plate Bending Machine

Features:

1. Italy Technology.
2. Upper-roll fixed,the two rollers under a fixed turn around the center arc movement take-off and landing,under two separate movements canroll up or down with. 
3. On a plate material does not need to complete U-turn and pre-bending roll-round school,and other processes.
4. Rollers are mainly the work of the three-driven roller to ensure that any thickness of the material sent to a good rolling function.
5. Due to the location of the three roller can rely on the close,to achieve a small diameter tube and rolling round the school.
6. Easy to operate,rolling ways to diversify.
7. Simple movement(horizontal and vertical movement of synthetic campaign to lift the arc trajectory),a small fault.
8. Plate rolling process,always in a state of clamping,the deviation will not slide.
9. The work of the three-roll,rollthe same track.
10. Rollers work in any state to release the space work out ,no need to reach the top position.
11. Microcomputer control, synchronization accuracy of ±0.2mm.



Main Technical Features

Model Max.
thickness
mm
Yield limit
MPa
Max. width Max. thickness Diameter of roller
mm
Rolling speed
m/min
Main motor power
Kw
Dimension
mm
Weight
kG
Min. diameter
mm
W11H-6*2000 4 245 500 160 5.2 5.5 3210*1170*1310 4000
W11H-4*2500 2 245 500 160 5.2 5.5 3170*1170*1310 4600
W11H-8*2000 5 245 550 190 5 5.5 3210*1170*1310 4200
W11H-6*2500 4 245 550 190 5 5.5 3710*1170*1310 5800
W11H-12*2000 8 245 600 230 5 5.5 4150*1320*1490 6000
W11H-8*2500 5 245 600 230 5 5.5 4650*1320*1490 6200
W11H-16*2000 12 245 700 270 4.5 7.5 3290*1620*1640 6800
W11H-12*2500 8 245 700 270 4.5 7.5 4420*1620*1640 7000
W11H-8*3200 6 245 700 270 4.5 7.5 5120*1620*1640 7300
W11H-20*2000 14 245 800 300 5 18.5 4380*1360*1490 8000
W11H-16*2500 12 245 800 300 5 18.5 4880*1360*1490 8400
W11H-12*3200 8 245 800 300 5 18.5 5580*1360*1490 9200
W11H-25*2000 20 245 1100 330 4 18.5 4130*1960*1750 11000
W11H-20*2500 14 245 1100 330 4 18.5 4630*1960*1750 12000
W11H-16*3200 12 245 1100 330 4 18.5 5330*1960*1750 13500
W11H-25*2000 20 245 800 330 5 18.5 4630*1960*1750 13000
W11H-20*3200 14 245 800 330 5 18.5 5330*1960*1750 15000
W11H-16*4000 12 245 800 380 5 18.5 4600*2420*2510 18000
W11H-32*2000 25 245 1300 360 4 22 5300*2420*2510 16000
W11H-25*3200 20 245 1300 420 4 22 5300*2420*2510 22000
W11H-20*4000 14 245 1300 420 4 22 6100*2420*2510 19000
W11H-35*2500 25 245 1500 460 4 30 5700*2850*2970 22000

* More sizes are available as requirement.

May 31 2020
               
ZHENGZHOU TIMEWAY MACHINE TOOL CO., LTD.