Operating Tips:

Hydraulic Iron Worker

Features:

1. Manual holding system.

2. Shearing position and punching position can not working at the same time.

3. Suit for small-lot production.

      

               Punching position                      Notching position                       Flat shearing









Main Technical Features

Specification Unit HIW-60 HIW-90 HIW-120 HIW-160 HIW-200
Punching pressure Ton 60 90 120 160 200
Max.shearing thickness of steel plates mm 16 20 25 30 35
Strength of steel plates N/mm2 ≤450 ≤450 ≤450 ≤450 ≤450
Angle of shearing  
Shearing sizes of one stroke(W×H) mm 8×400 10×480 16×600 20×600 35×400
16×250 20×330 25×330 30×355 20×700
Ram stroke mm 80 80 80 80 100
Number of stroke times/min 8-22 8-22 8-22 8-22 8-22
Depth of throat mm 300 355 400 600 550
Punching thickness mm 16 20 25 28 30
Max.diameter of punching mm 25 30 35 38 40
Round steel   mm 45 50 60 65 70
Square steel mm 40×40 45×45 50×50 55×55 60×60
90°Shearing of equal-angle steel mm 120×120×12 140×140×12 160×160×14 180×180×16 200×200×16
45°Shearing of equal-angle steel mm 70×70×8 70×70×10 80×80×7 80×80×10 100×100×10
H-beam mm / 100×100 120×120 175×175 200×200
C-Channel mm 126×53×5.5 160×60×6.5 200×75×9 280×86×11.5 280
工-beam mm 126×74×5 160×86×6 200×102×9 280×124×10.5 280
Main motor power kw 4/5.5 5.5/7.5 7.5/11 11/15 15/18.5
Overall dimension(L×W×H) mm 1650×800×1780 1950×900×1930 2350×980×2100 2680×1060×2380 2800×1340×2030
April 06 2020
               
ZHENGZHOU TIMEWAY MACHINE TOOL CO., LTD.