Product Details

Machine Summary

• This machine is specially designed for deep hole processing of cylindrical workpiece.

• It can perform different processing, such as drilling, boring, expanding and roller burnishing, etc. Besides machining through-hole, it can also process step hole and blind hole.

• The machine tool is suitable for production of special cylinder, coal cylinder, hydraulic machinery, high pressure boiler tube, petroleum, military, electrics and airspace, etc.

Performance and Features

• The process adopts the mode of workpiece rotating and tools feeding, if necessary the tool can be also rotary. With the workpiece rotating and the tool feeding.

• The cutting fluid reaches the cutting area by oil supply device or through boring bar end, the chip removal adopts BTA type. When boring, cutting fluid pushes chips forward out of headstock end. 

• The machine can be equipped with drilling box, achieving double rotation of workpiece and tools, and the single action is also available for meet the different processing demand. Under the conditions of lower speed rotation of the workpiece, the processing efficiency and quality can be assured.

• The machine has a wide application according to different processing demand.

• DB-series is equipped with workhead box, but isn't equipped with boring box or drilling box; DB-A series add to boring box or drilling box on the basis of the DB-200, so higher efficiency machining  deep hole for cylindrical workpieces.

HeadStock:

• The box adopts high quality casting, with artificial aging treatment. The machine spindle head is short cone flange structure. The headstock spindle is treated by dynamic balancing, which keeps stable rotation and bearing accuracy. The headstock mainly offer powerful torque, which is used for workpiece rotation with 12steps speed. The spindle box adopts powerful oil lubrication. The spindle has the excellent rigidity, high strength, and good precision retaining ability. The chuck can choose 3-jaw chuck or 4-jaw chuck.

Support Frame and Steady Rest for Workpiece:

• The machine has workpiece rests and closed steady rest. They are used to clamp and position the workpiece with the good stability during processing.

Boring(Drilling) Bar Rest:

• Three pieces of holder are equipped in standard configuration. The holder is in two half-tile structure up and down, which is easy for changing of the drilling bar. It is used to support the bar, control moving direction of the drilling bar and remove the vibration.

Standard Accessories

• Boring bar

• Boring head

• Cooling system

• Chip conveyor

• Oil gun

• Lubrication system

• Leveling wedges & bolts

• Tools & tool-box

• Operation manual

Optional Accessories

• Other boring head

• Other boring bar

• Drilling head

• Chain-type chip conveyor